Science Hub Logo

Pre-Lab Task ⚡ Parallel Circuit

8 chars (must include 0-9, A-Z, a-z)
2 chars (1st digit 0-9, 2nd letter a-z)
Up to 6 digits (0-9 numbers only)
Up to 50 chars (Uppercase only)

1 Objective

To investigate the current and voltage relationships in a parallel circuit with two resistors.

2 Apparatus

3 Procedure & Circuit Diagram

Circuit Diagram

Select the correct action verb for each step in order:

  • 1.
    two resistors (R1 and R2) in parallel with each other across common junctions.
  • 2.
    the parallel resistor combination in series with the 3 V battery, ammeter, and switch to complete the main circuit loop.
  • 3.
    the voltmeter in parallel across the two resistors to measure the voltage across them.
  • 4.
    the total circuit current I from the ammeter and the potential difference V from the voltmeter after closing the switch, then record them in the table.
  • 5.
    the measurements using different resistance value pairs for R1 and R2.
Note: Ensure all connections are secure before closing the switch. Always turn off the switch when changing component settings.

4 Simulation

Status: Circuit Incomplete
Simulation Snapshot for Print
Ammeter
0.00 A
Voltmeter
0.00 V
3V Battery
Resistor 1
5 Ω
Resistor 2
5 Ω
Switch

5 Result and Analysis

1. Tabulate the data in the table below.

Trial Number 12345
Resistance of resistor 1 (Ω) -----
Resistance of resistor 2 (Ω) -----
Voltage across two resistors V (V) -----
Current of circuit I (A) -----
Equivalent resistance (Req = V/I) (Ω) -----
1 / R1 (Ω-1) -----
1 / R2 (Ω-1) -----
1 / Req (Ω-1) -----

6 Discussion & Conclusion

1. How is the equivalent resistance Req of two resistors connected in parallel related to their individual resistances R1 and R2?

2. When an additional branch with a resistor is connected in parallel to the circuit, what happens to the total equivalent resistance Req of the circuit?

3. How does the equivalent resistance Req of a parallel combination compare to the resistance of the smallest individual resistor in the circuit?

4. If resistor R2 is removed or disconnected while the circuit switch remains closed, what will happen to the current flowing through branch R1?

⚡ Circuit Diagram
Circuit Diagram